LED bulb repair is simple when common problems are identified. Most LED bulbs stop working due to loose connections, damaged capacitors, or faulty LEDs. By turning off the power and opening the bulb carefully, loose wires can be resoldered and damaged components replaced.
- Turn off main power before opening the bulb
- Wait a few minutes for capacitors to discharge
- Check for loose wires and resolder if needed
- Look for burnt or swollen capacitors and replace them
- Test LEDs one by one using a multimeter or 3V battery
- Replace faulty LED or short it temporarily for testing
- Fix flickering by changing the driver capacitor
- Clean dust from the bulb to prevent overheating
- Apply thermal paste between LED plate and heat sink
- Ensure proper ventilation when reinstalling the bulb
- Avoid repairing badly burnt or cracked bulbs
- Replace low-quality components with better-rated ones
Easy Led Bulb Repair Tips : നമ്മുടെയെല്ലാം വീടുകളിൽ എൽ ഇ ഡി ബൾബുകൾ ഉണ്ടാകും. കൂടുതൽ പേരും ഇപ്പോൾ വെളിച്ചത്തിനായി ഇത്തരം ബൾബുകളാണ് ഉപയോഗിക്കുന്നത്. നല്ല വെളിച്ചവും കുറഞ്ഞ വൈദുതിയുടെ ഉപയോഗവും മൂലം LED ബൾബുകൾക്ക് കൂടുതൽ പ്രചാരം ലഭിച്ചത്. എന്നാൽ കുറച്ചു നാളത്തെ ഉപയോഗത്തിന് ശേഷം അവ കേടായി പോകാറുണ്ട്. ഇത്തരത്തിൽ കേടായവ
നമ്മളെല്ലാം കളയുകയാണ് പതിവ്. എന്നാൽ ഒരു രൂപ ചിലവില്ലാതെ വീട്ടിൽ തന്നെ എൽ ഇ ഡി ബൾബുകൾ റെഡി ആക്കിയെടുക്കാം. അതിനുള്ള അടിപൊളി മാർഗമാണ് ഇന്ന് ഈ വീഡിയോയിലൂടെ നിങ്ങളുമായി പങ്കുവയ്ക്കാൻ പോകുന്നത്. ഇങ്ങനെ റെഡി ആക്കിയടുത്ത ബൾബ് നമുക്ക് വീണ്ടും വെളിച്ചത്തിനായി വീടുകളിൽ ഉപയോഗിക്കാവുന്നതാണ്. അതിനായി ആദ്യം തന്നെ ബൾബിന്റെ മുകൾഭാഗത്തുള്ള
ഗ്ലാസ് കൊണ്ടുള്ള കവർ തുറക്കണം. ഇത് തുറക്കാൻ വളരെ എളുപ്പമാണ്. ഒരു പ്ലെയർ ഉപയോഗിച്ചു തട്ടി കൊടുത്താൽ പെട്ടെന്ന് ഇളക്കിയെടുക്കാൻ സാധിക്കും. തുറന്നു വെച്ച ശേഷം ബോർഡിലേക്ക് വരുന്ന പവർ സപ്ലൈ ഒന്ന് ചെക്ക് ചെയ്യണം. അത് എങ്ങനെയാണെന്നെന്നും തുടർന്ന് എന്തൊക്കെയാണ് ചെയ്യേണ്ടതെന്നും വിഷാദമായി വീഡിയോയിൽ കാണിച്ചു തരുന്നുണ്ട്. ഇതുപോലെ ഒന്ന് ട്രൈ ചെയ്തു നോക്കൂ..
ഒട്ടും ചിലവില്ലാതെ എളുപ്പത്തിൽ കേടായ ബൾബുകൾ വീട്ടിൽ തന്നെ റെഡിയാക്കിയടുക്കാം. വീഡിയോ നിങ്ങൾക്ക് ഇഷ്ടമായാൽ ലൈക് ചെയ്യാനും ഷെയർ ചെയ്യാനും മറക്കരുത്. കൂടുതല് വീഡിയോകള്ക്കായി suniltech media ചാനല് Subscribe ചെയ്യാനും ബെൽ ഐക്കൺ ക്ലിക്ക് ചെയ്തു നോട്ടിഫിക്കേഷൻ ഇനേബിൾ ചെയ്യാനും മറക്കരുത്. Led Bulb Repair Tips Video Credit : suniltech media
1️⃣ LED Bulb Not Turning On
Likely causes:
- Loose internal wire
- Failed driver circuit
- Burnt resistor or capacitor
Easy checks:
- Gently shake the bulb → if it flickers, there’s a loose connection.
- Open the bulb casing carefully.
- Resolder any loose wires or cracked solder joints.
2️⃣ Flickering LED Bulb
Likely causes:
- Bad capacitor in the driver circuit
- Poor AC supply or faulty switch
Easy fix:
- Replace electrolytic capacitor (usually 400V, 4.7–10µF).
- Look for bulging or leaking capacitors.
3️⃣ Dim Light Output
Likely causes:
- Overheated LEDs
- Aging capacitor
- Poor heat dissipation
Fix:
- Clean dust inside bulb
- Apply thermal paste between LED plate and heat sink
- Replace weak capacitor